|
Construction & Design Standards
Table of Contents |
|
 Air Valves |
1" air valve
|
|
Introduction Design and Construction Standards |
Overall Introduction, call before you dig, USA locate information
|
|
Index |
New Installations
|
|
Section 1 |
General Information- Contractors, Developers, Planners and Inspector Information. CTB Plotstyles, Linetypes, Mapping Symbols and Templates.
|
|
Section 2 |
Installation of U/G Water Facilities in Residential Subdivisions-Inspection, Excavation, Backfill, and Workmanship.
|
|
Section 3 |
Staking Requirements-Examples of Lettering, Developer Responsibilities.
|
|
Section 4 |
Excavation and Trenching Safety Requirements-General and Specific, Call before you dig.
|
|
Section 5 |
Trench Bedding & Backfill-Materials, Construction, and Field Sampling and Testing.
|
|
Section 6 |
Trench Excavation Standards-Trenching Guidelines, Safety, Box/Vault/Junction Enclosure Installation.
|
|
Section 7 |
Typical Trench Details Mains, Cathodic Protection, Hydrant Bypass, Refurbishment and General Utility Locations.
|
|
Section 8 and 8a |
Water and Sewer Separation-Mains and Services. Potable and Non Potable Water Separation.
|
|
Section 9 |
Water Construction Standards- Types of Pipes, Meters and Provisions, Fittings, Taps, Cathodic Protection.
|
|
Appendix 9A |
This section is currently under revision. Please refer to AWWA Standard C600-05 (or latest edition) for standards on Installation of Ductile Iron Water Mains and Their Appurtenances.
|
|
Appendix 9B |
This section is currently under revision. Please refer to AWWA Standards C605-05 (or latest edition) for standards on Underground Installation of Polyvinyl Chloride (PVC)Pressure Pipe and Fittings for Water.
|
|
Appendix 9C |
This section is currently under revision. Please refer to AWWA Standard C651-05 (or latest edition) for standard on Disinfecting Water Mains.
|
|
Index to Appendix 10 |
Sections 10A-10L
|
|
Appendix 10A |
Backflow Prevention Assemblies- Commercial, Industrial, or Multi-tenant Domestic, and Fire.
|
|
Appendix 10B |
Distribution Branch Installations- 6" x 6" through 12" x 12".UNDER REVIEW-PLEASE CONTACT Tiffany Bowling at 834-8044 or Kelly McGlynn at 834-8293 for further information.
|
|
Appendix 10C |
Distribution Transition Fittings- 6" Transite Pipe to 6" PVC/DI Pipe through 12" Transite to 12" PVC/DI Pipe.UNDER REVIEW-PLEASE CONTACT Tiffany Bowling at 834-8044 or Kelly McGlynn at 834-8293 for further information.
|
|
Appendix 10D |
Distribution Tap Assemblies- 4" through 12" Taps.UNDER REVIEW 10D-7 THRU 10D-16.-PLEASE CONTACT Tiffany Bowling at 834-8044 or Kelly McGlynn 834-8293 for further information.
|
|
Appendix 10E |
Flush assembly Installations- 6" through 12".
|
|
Appendix 10F |
Fire Protection Installations-Off New Water Mains, Fire protection 4" through 12".
|
|
Appendix 10G |
Horizontal Elbow Installations- 6" 11.25 degree through 12" 90 degrees.UNDER REVIEW-PLEASE CONTACT Tiffany Bowling at 834-8044 or Kelly McGlynn at 834-8293 for further information.
|
|
Appendix 10H |
Service Tap Installations- 1" through 6" service taps.
|
|
Appendix 10I |
Vertical Elbow Installations- 4" through 12" Elbows.UNDER REVIEW-PLEASE CONTACT Tiffany Bowling at 834-8044 or Kelly McGlynn at 834-8293 for further information.
|
|
Appendix 10J |
Distribution Valves
|
|
Appendix 10K |
Water Meters Small- 3/4" through 2" Meters.
|
|
Appendix 10L |
Miscellaneous Water Charts- Clamps, Sleeves, Tees, Valves, Reducer Charts.
|
|
Construction Standards Revisions |
Summary document of all revisions made to the Construction and Design Standards
|
|
Table of Contents |
CONSTRUCTION & DESIGN STANDARDS TABLE OF CONTENTS
|
|
||||||||||||||||||||||||||||||||||||||||
